2.0m Concealed Door/Wall
Sensormatic · AM · concealed · EMEA
The shorter sibling of the 2.4 m Concealed system — invisible AM detection that mounts inside door frames or walls with no visible pedestals. Covers exits up to 2.0 m (6 ft 6 in), pairs with an AMS9033 controller, and keeps the storefront clean on heritage retail and boutique deployments. EMEA-approved.
- Technology
- Acousto-Magnetic (AM)
- Form factor
- Concealed door/wall mount
- Coverage
- Up to 2.0 m (6 ft 6 in)
- Best for
- Heritage storefronts, boutiques, narrower exits
Overview
Invisible detection for narrower exits.
Where the 2.4 m Concealed covers wider entrances, the 2.0 m sits under the same concealed-install philosophy at a lower cost of ownership for narrower doorways. Receiver antennas mount directly to the door in a self-adhesive cable channel, or hide inside the wall of the doorway. The transmitter cable runs into the floor. No visible hardware at the storefront, no pedestals to work around.
Remote alarm delivers an audible alert to store associates when protected merchandise passes through the detection zone. Quick to install on existing doorways — the install cost is typically lower than for visible-pedestal systems, and the aesthetic preservation is the whole point for heritage retail, luxury boutiques, and architecturally-sensitive storefronts.
Features
- Invisible installation — antennas mount in door frame or inside wall
- Coverage up to 2.0 m (6 ft 6 in)
- Quick, simple install via self-adhesive cable channel
- Remote audible alarm for staff notification
- AMS9033 controller integration
- Glass-mount option (0352-0072-01) for all-glass doors
- EMEA-approved (47 CFR Part 15, EN 300 330, EN 301 489, RSS-210)
Specs
Technical snapshot
| Technology | Acousto-Magnetic (AM) |
|---|---|
| Operating frequency | 58 kHz (±200 Hz) |
| Transmission burst duration | 1.6 ms |
| Transmission current | 8 A peak |
| Burst repetition rate | 37.5 Hz normal / 75 Hz validation (50 Hz AC) · 45 Hz / 90 Hz (60 Hz AC) |
| Transmitter outputs | 2 ports (two multiplexed antennas) |
| Receiver inputs | 2 ports (two antennas, multiplexed) |
| Receiver center frequency | 58 kHz |
| Primary input | 100-120 VAC or 200-240 VAC @ 50-60 Hz |
| Primary power fuse | 2.5 A, 250 V |
| Current draw | 1.2 A peak (120 VAC) · 0.8 A peak (230 VAC) |
| Input power | < 150 W |
| Operating temperature | 0°C to 50°C (32°F to 122°F) |
| Non-operating temperature | -40°C to 70°C (-40°F to 158°F) |
| Relative humidity | 0 to 90 %, non-condensing |
Compatibility
Works with: Sensormatic AM Sensors · Digital Remote Alarm · AMS9033 Controller
Product codes: ZAL33-3005-2 (single loop antennas, CFG) · ZAL33-3005D-2 (dual loop antennas, CFG) · 0352-0072-01 (glass mount set for channels on glass doors)