Synergy 2.4m Concealed Door or Wall System
Sensormatic · AM · Synergy concealed · 2019
The Synergy 2.4m Concealed is the 2019-generation replacement for the earlier 2.4m Concealed Door/Wall system. Invisible AM EAS protection for exits up to 2.4 m (7 ft 10 in) with a tall 1.8 m vertical detection zone. Mounts to door frames or inside walls via self-adhesive cable channel; transmitter cable runs under the floor for best detection performance.
- Technology
- Acousto-Magnetic (AM)
- Type
- Concealed door/wall · 2.4 m · 2019-generation
- Best for
- Heritage storefronts, luxury boutiques needing invisible detection at wide exits
- Compatibility
- AMS3004-A Cap-Board Enclosure · 3D Overhead Traffic Counting Sensor · Wireless Device Manager
Overview
Replaces the 2014 2.4m Concealed with Synergy-era features.
The 2019 generation inherits the invisible-install approach of its predecessor — receiver antennas in self-adhesive cable channel on door frames or inside walls, transmitter in the floor — but adds Synergy-grade intelligence: Tags-Too-Close filtering, Jammer Detection, directional traffic analysis (via optional 3D Overhead Traffic Counting Sensor), and power-on-demand standby (up to 78% power savings).
Features
- Invisible installation in door frame or wall
- Coverage up to 2.4 m (7 ft 10 in) wide
- Vertical detection up to 1.8 m (6 ft) off floor
- Tags-Too-Close filtering reduces nuisance alarms
- Jammer Detection triggers alarm on defeat attempts
- Power-on-demand standby (up to 78 percent power savings)
- Optional 3D Overhead Traffic Counting Sensor
- AMS3004-A cap-board enclosure
Specs
Technical snapshot
| Technology | Acousto-Magnetic (AM) |
|---|---|
| Coverage | Up to 2.4 m wide, 1.8 m vertical |
| Transmission burst duration | 1.6 ms |
| Transmit current | 4.5-14 A peak (loop-size dependent) |
| Burst rate | 90 Hz (1-loop) · 45 Hz each loop (2-loop) |
| Receiver center frequency | 58 kHz ±200 Hz |
| Primary input | 100-120 VAC or 220-240 VAC @ 50-60 Hz |
| Primary power fuse | 3.15 A, 250 V |
| Input power | < 19.7 W (120 V) · < 21.6 W (240 V) |
| Cap-board (AMS3004-A) dims | 210×271×83.75 mm, 2.1 kg |
| Ambient temperature | 0°C to 50°C |
Compatibility
Pairs with AMS9060 Controller, Sensormatic AM Sensors, Pro-Max, Door-Max, Ranger/Satellite/Amorphous Core antennas, 3D Overhead Traffic Counting Sensor, Wireless Device Manager, Wireless Module, SMaaS. Cap-board AMS3004-A included.
Product codes: ZA3004-1A (single loop antenna) · ZA3004-2A (dual loop antenna) · ZP3004-CONDUIT (conduit kit) · 0352-0072-01 (glass-mount kit) · AMS3004-A (cap-board enclosure) · AMS9060 Controller required